In order to run your business smoothly you must maintain your office space properly. Maintaining electrical issues is a key aspect of proper maintenance of any office space. As far as offices are concerned, there are quite a few electrical issues that are common. It is important to deal with those issues carefully. Only then you can avoid downtime in your business which invariably proves costly. Moreover, safe electrics in any office also keep the employees safe.
Electrical faults are the last thing you expect in an office. Even a single fault proves powerful enough to bring your business to a grinding halt till it gets resolved. Till the time it is corrected, your business loses money every minute.
Electrical challenges in commercial spaces
As far as commercial properties or buildings are concerned, electrical systems there are more complicated compared to that in residential properties. More complicated an electrical system, the more chances it has to go wrong. Let us analyse the typical electrical system in any standard office. It is supposed to have separate lighting and emergency lighting as well as security alarms, air conditioning units, heating circuits, fire alarms, data communication facilities like computer servers, phones, power floor boxes and so much more.
It is theoretically pretty easy to keep your business up and running all the time. You just have to be aware of the potential issues that may arise in your commercial electrical system. Thus, you can take preventive measures to avoid business downtime. You may also hire a professional commercial electrician to deal with your electrical issues as well. “electrical switchboards”
Common electrical issues at business places
Power loss
An unexpected power loss may have a shattering impact on your business, especially in this age and time when most of the things are done and performed online. When power trips in an office, the computers, printers and servers everything goes down. So, no one can get any work done until the power connection is restored. A sudden trip in the power connection in your office may also result in data loss. If you store sensitive data on your local servers then make sure to have a sound power backup system too to avoid downtimes.
A sudden power loss in an office may result from a number of causes. The problem may also crop up from a fault at the local power station. If this is the problem, then fixing the problem is beyond your scope. You have to wait till the power supplier or relevant authority fixes the problem. Even weather conditions may have damaged the power lines in your office. On the other hand, it could also be a local issue related to your office space as well. A fuse could have blown or a circuit breaker has tripped because of some reason or the other. There can also be a short circuit in you. Each of these factors can result in downtime of your business bringing everything to a grinding halt.
When the power in your office is suddenly gone, try flicking the fuse switch. This often resolves the problem and restores power supply. But if that does not work then what is going to be the next step? To put it in simple words, the next step is to call a registered commercial electrician to look into the matter.
Lights that flicker and are dim
Proper lighting invariably caters to productivity as far as workplaces are concerned. Flickering and dimming lights are one of the commonest issues in offices and other commercial spaces. There are quite a few reasons behind this. First of all, you should check out whether the light fittings require replacement. When a light fitting comes to the end of its lifespan, it may start to flicker. However, flickering may also occur because of other reasons. The problem must be addressed and looked upon into without unnecessary delay. If it is left ignored and unattended to the problem may snowball into a major crisis in course of time. Loose electrical connection is also known to cause lights flicker and dimming. A loose electrical connection is comparatively easy to fix. But this may indicate the fixture is too old and needs replacement.
Circuit breakers that continuously trip
A circuit breakers trips because it detected a fault in the circuit. Thus, its inbuilt safety mechanism becomes active to terminate power transmission through the circuit. This ensures there is no overheating and nor is any fire hazard. But if a circuit breaker trips frequently, it indicates your electrical system has some serious issue. There are many possible issues that can lead to this circumstance. Some of which include a ground fault, an overloaded circuit or even a short circuit. To avoid any downtime, you can flip the breaker switch to restore normalcy. But it is much better to get the issue diagnosed by a licensed commercial electrician.
Sparking electrical fixtures
If sparks occur when you plug in appliances then that itself is a danger signal. The situation may cause the wire to burn and melt. Most electrical fires occur when a wire in the circuit burns and melts. Even if a plug becomes excessively hot when in use, that is also a sign of hazard. You should never ignore these signals from your electrical system. Commercial electrician in London with years of experience in the trade these issues usually indicate an overloading fixture through use of extension cords. It exerts excessive pressure on an electrical system and the system unfortunately was not designed to handle so much pressure.
In that case you may get additional outlets installed by a qualified commercial electrician. On the other hand, the problem of sparking or overheating fixtures may also result from manufacturing fault of a fixture. So, you have to get it replaced with a faultless one. Under no circumstance should you ignore this kind of issues related to electricity.
